Audreal hifi components

The high end stereo preamp of the Reference series CA is a balanced double mono pre amplifier with completely separate signal paths and power supply. Like all components of the A series (reference series), the goal was to achieve the best musical performance, regardless of the materials and components required. The patented sound enhancing technology "Bias Technology for Avoiding the Dynamic Invalidation of Capacitor" has also been applied to further improve the already impressive transparency and purity of mid and high tones.

Technical details:

• Wide band audio input transformers
• 3 pieces low noise power transformers
• 2 mm gold plated PCB
• Output level: 9V (RMS)
• Input sensitivity: 250mV
• Total Harmonic Distortion: <0,02％
• Frequency range: 10Hz~80kHz
• Signal / Noise Ratio: >110dB
• Stereo inputs: 3  x RCA, 1 x XLR
• Stereo outputs: 1 x RCA, 1 x XLR
• Weight: 11,6 kg
• Size (B*W*D): 430mm * 107mm * 377mm 
• Remote control
• Color: black

Identical to the CA preamplifier. Only the front is slightly modified to visually match easier with other audio components.

A high-end balanced double mono preamplifier with completely separate signal paths and power supply. Like all components of the Reference series, the goal was to achieve the best musical performance, regardless of the materials and components required for this. The patented sound enhancing technology "Bias Technology for Avoiding the Dynamic Invalidation of Capacitor" has also been applied to further improve the already impressive transparency and purity of mid and high tones.

Technical details:

• Wide band audio input transformers
• 3 pieces low noise power transformers
• 2 mm gold plated PCB
• Output level: 9V (RMS)
• Input sensitivity: 250mV
• Total Harmonic Distortion: <0,02％
• Frequency range: 10Hz~80kHz
• Signal / Noise Ratio: >110dB
• Stereo inputs: 3  x RCA, 1 x XLR
• Stereo outputs: 1 x RCA, 1 x XLR
• Weight: 11,6 kg
• Size (B*W*D): 430mm * 107mm * 377mm 
• Remote control
• Color: black

The MP-1 is a passive preamplifier. In addition to a volume control with the excellent APLS Blue potentiometer, the gain can be set to 0dB, + 3dB, + 5dB for perfect synergy with the source. 4 Very high quality audio transformers are used to match the input impedance. Because the vulnerable audio signal does not run through active components, there is less distortion and less noise. That is why passive preamps are so popular.

Technical details:

• Frequency range: 20Hz~40KHz +/- 1dB
• Signal / Noise Ratio: ≥100dB
• Input impedance: 600Ω, 10K Ω, 50KΩ
• Stereo inputs: 3  x RCA
• Stereo outputs: 2 x RCA
• Weight: 7 kg
• Size (B*W*D): 350mm * 129mm * 259mm

The top model of Audreal's power amplifiers. This audiophile power amplifier delivers up to 2 x 100 Watt in pure class A, at 8 Ohm, and is built up as a dual mono. In addition to more than enough power, a wide and deep stereo image is also presented, even at low volumes. The music flows, as it were, from the loudspeakers, which seem to disappear completely. The sound is clear, dynamic and yet relaxed.

Technical details:

• Output power: 2 x 100W (Class A, 8Ω)
• Total Harmonic Distortion: <0,03 % bij 1KHz, 30W
• Frequency range: 10Hz~200kHz (-1dB)
• Signal / Noise Ratio: >100dB
• Stereo inputs: 1 x RCA, 1 x XLR
• Loudspeaker outputs: 2 x 2 (for Bi-Wiring)
• Weight: 75 kg!!
• Size (B*W*D): 430mm * 295mm * 650mm
• Color: black

The A600P power amplifier is based on the A600E integrated amplifier and the PA power amplifier. Where possible, the design has been improved and that makes this amplifier the 'small' brother of the top model, PA power amplifier. The power and dimensions are slightly less than that of the PA power amplifier. The sound quality is of the same exceptionally high level.

Technical details:

• Output power: 2 x 80W (Class A, 8Ω)
• Totale Harmonc Distortion: ≤0,015% bij 1KHz, 30W
• Frequency range: 10Hz~200kHz (-1dB)
• Signal / Noise Ratio: >100dB
• Stereo inputs: 1 x RCA, 1 x XLR
• Loudspeaker outputs: 2 x 2 (for Bi-Wiring)
• Weight: 63 kg!!
• Size (B*W*D): 430mm * 247mm * 620mm
• Color: black

These fully balanced mono power amplifiers have an output transformer, just like tube amplifiers. Just like tube amplifiers, these amplifiers have a separate output for 4 Ohm and 8 Ohm speakers to better match the impedance of the speakers. The output transformers reduce distortion, improve stability, frequency range and sound quality. The effect is amazing. The sound of these mono blocks can be described as mellow, warm, transparent and very fast. The amplifiers are very powerful, offer up to 80 Watt in Class A and look great with their VU meters.

Technical details per mono block:

• Output power: 80W (Class A, 8Ω)
• Frequency range: 10Hz~20KHz
• Inputs: 1 x RCA, 1 x XLR
• Input sensitivity: 1.5V
• Input impedance: 50kOhm
• Signaal / Noise Ratio:  ≥95dB
• Totale Harmonic Distortion ≤0.3% (1kHz/1V)
• Loudspeaker outputs: 4Ω, 8Ω
• Weight: 35Kg
• Size (B*W*D): 305mm * 202mm * 427mm
• Color: black

The CS300 is a stereo power amplifier based on the popular 300B power tubes. Of these tubes, one per channel in class A is used, so this is called a single ended amplifier. According to many music lovers, this type of amplifier is the best you can get. This amplifier offers excellent qualities such as excellent build quality and component selection, low distortion and a clear, transparent, soothing and very good sound quality. The CS300 power amplifier also has a passive volume control so that it can be connected directly to the source such as a CD player or audio streamer.

Now only available with full aluminum front.

Technical details:

• Output power: 2 x 10W
• Frequency range: 10Hz~20KHz
• Stereo inputs: 1 x RCA
• Input sensitivity: 300mV
• Input impedance: 50kOhm
• Signal / Noise Ratio:  ≥80dB
• Total Harmonic Distortion: ≤0.3% (1kHz/1V)
• Loudspeaker outputs: 4Ω, 8Ω
• Tubes: 300B * 2, 6SN7GT/G * 2, 12AX7 * 1, 5U4G * 1
• Front: beautiful combination of aluminum and wood, or completely aluminum
• Weight: 27Kg
• Size (B*W*D): 344mm * 242mm * 483mm
• Review: Hi-finews (Editor's choice)

The CS88 is a stereo power amplifier based on the well-known KT88 output tubes. By applying 2 of these tubes per channel in push / pull configuration, a high maximum power of 2 x 60 Watt is possible. This makes this amplifier suitable for controlling most loudspeakers. Music lovers can enjoy the excellent sound qualities that tube amplifiers offer, without having to have speakers with a very high efficiency or high impedance. This power amplifier also has a high-quality passive volume control which allows it to be connected directly to the source, such as a CD player or audio streamer.

Now only available with full aluminum front.

Technical details:

• Output power: 2 x 60W
• Frequency range: 10Hz~30KHz
• Stereo inputs: 1 x RCA
• Input impedance: 50kOhm
• Signaal / Noise Ratio:  ≥89dB
• Total Harmonic Distortion: ≤0.25% (1kHz/2V)
• Loudspeaker outputs: 4Ω, 8Ω
• Tubes: KT88 * 4, EL84 * 2, 12AX7 * 1
• Front: beautiful combination of aluminum and wood, or completely aluminum.
• Weight: 27,5 kg
• Size (B*W*D): 344mm * 242mm * 483mm

These single ended class A mono power amplifiers have the beautiful character of the beloved single ended class A tube amplifiers and yet are powerful enough to produce more than enough of sound pressure with most speakers. The relatively high output power is achieved by excellent output transformers and the 805 tube. This tube is loved and known for the pleasant sounding even harmonics, wide sound stage and high resolution that they can deliver. Both the design, construction and selection of parts are of the highest level.

Technical details:

• Output power: 28W per channel
• Frequency range: 10Hz~30KHz
• Input: 1 x RCA
• Input sensitivity: 600mV
• Signal / Noise Ratio: ≥83dB
• Total Harmonic Distortion: ≤0,27% (1kHz/1V)
• Tubes: 2A3C * 1, 6SN7GT/G * 1, 805 * 1
• Weight: 30 kg per channel
• Size (B*W*D): 300mm * 263mm * 598mm per channel

The MS-3 is a mono power amplifier based on the KT88 (2 pieces in push-pull), 12AX7 (ECC83) and 12AT7 tubes. Furthermore, the best components are used, such as WIMA and Rubycon capacitors and precision resistors, resulting in a very good sounding pair of amplifiers. The sound can be described as transparent, fluent and friendly. Due to the high output power, loudspeakers are controlled with ease.

Technical details:

• Output power: 60W per channel
• Frequency range: 10Hz ~30kHz
• Input: 1 x RCA
• Input sensitivity: 400mV
• Signal / Noise Ratio: ≥90dB
• Totale Harmonic Distortion: ≤0.25% (1kHz/2V)
• Tubes: 12AT7*1; 12AX7*1, KT88*2, 5Z3P*1
• Weight: 14 kg per channel
• Size (B*W*D): 350mm * 227mm * 270mm

This is an integrated amplifier from the highest class and the best price / quality ratio, without exaggerating. Quality, strength, control, beauty, dynamics, musicality, (user) convenience, this amplifier offers it all! In addition to an integrated amplifier, the A600E can also be used as a power amplifier through its direct-in input.

Technical details:

• Output power: 2 x 160W (8Ω), 2 x 300W (4Ω)
• Total Harmonic Distortion: ≤0,03% bij 1KHz, 30W
• Frequency range: 10Hz~100kHz (-0,5dB)
• Signal / Noise Ratio: >95dB
• Stereo inputs: 3 x RCA, 1 x XLR
• Loudspeaker outputs: 2 x 2 (for Bi-Wiring)
• Weight: 53 kg!!
• Size (B*W*D): 430mm * 220mm * 596mm
• Remote control
• Color: black
• Review: Hi-finews (Highly recommended), Audio (German magazine, 125 points!)

The PA-M (II) plays in higher classes than its price suggests. This amplifier can easily be compared with amplifiers that are 2 to 3 times as expensive. This is the bargain among the amplifiers up to 4000 Euro. Each channel has its own toroidal transformer and the best components are used. At the front there are VU meters that show the volume level or the output power. In addition to two pairs of RCA inputs (RCA), the PA-M (II) has a balanced input (XLR) and a USB input. The PA-M (II) has a high quality DAC on board and can process signals up to 16 bit / 48 KHz via its USB input.

Technical details:

• Output power: 2 x 20W (8Ω) Class A
• Totale Harmonic Distortion: ≤0,03% bij 1KHz
• Frequency range: 10Hz~100kHz (±1,5dB)
• Signal / Noise Ratio: >100dB
• Stereo inputs: 2 x RCA, 1 x XLR and 1 x USB (DAC input)
• VU meters
• Weight: 23 kg
• Size (B*W*D): 430mm * 118mm * 445mm
• Remote control
• Color: Black
• Review: Audio (100 points), AudioDandy

The well-known and beloved XA6950 amplifier has been renewed and improved where possible. The output stages have also been put in class A, which takes the sound quality to an even higher level. 6922 Tubes are used in the preamp section. The XA6950 (II) has a high quality DAC on board and can process signals up to 16 bit / 48 KHz via a USB input. An amplifier to enjoy for a long time, it does everything right.

Technical details:

• Output power: 2 x 40W (8Ω) Class A
• Total Harmonic Distortion: ≤0,06% bij 1KHz
• Frequency range: 10Hz~100kHz (±1,0dB)
• Signal / Noise Ratio: >95dB
• Stereo Inputs: 3 x RCA, 1 x XLR en 1 x USB (DAC input)
• Weight: 28 kg
• Size (B*W*D): 430mm *170mm * 460mm
• Remote control
  
• Color: black
• Review: (Polish translation) HiFi Choice XA6950(II) (5 stars), HiFi-Advice

The XA6800R (II) offers the detailed, warm and open sound that class A amplifiers are known for. The VU meters in the front show the output power. Like all Audreal amplifiers, this amplifier plays in a higher class than its price suggests. The XA6800R (II) has a high quality DAC on board and can process signals up to 16 bit / 48 KHz via a USB input.

Technical details:

• Output power: 2 x 30W (8Ω) Class A
• Total Harmonic Distortion: ≤0,03% at1KHz
• Frequency range: 10Hz~100kHz (±1,0dB)
• Signal / Noise Ratio: >93dB
• Stereo inputs: 4x RCA, 1 x USB (DAC input)
• Weight: 19 kg
• Size (B*W*D): 430mm *140mm * 410mm
• Remote control
• Color: black
• Review (Polish translation): HiFi Choice XA6800R(II) (4,5 stars)

Short signal paths, smart circuits and good components mean that this integrated stereo amplifier is almost undefeated in the quality offered for the asking price. In addition to an open and smooth sound, this amplifier offers 3 inputs, remote control, a beautiful appearance and more than enough power.

Technical details:

• Output power: 2 x 50W (8Ω)
• Total Harmonic Distortion: ≤0,2% bij 1KHz
• Frequency range: 10Hz~70kHz (-1dB)
• Signal / Noise Ratio: >89dB
• Stereo Inputs: 3 x RCA
• Tubes: 4 x KT88(6550), 2 x ECC83 (12AX7), 2 x 6N8P(6SN7)
• Loudspeaker outputs: 2  (4Ω and 8Ω)
• Weight: 24 kg
• Size (B*W*D): 430mm * 219mm * 356mm
• Remote control
  
• Color: Dark grey and aluminum
• Review: Audio (German magazine, 100 points)

The Audreal V20 integrated amplifier is similar to the V30 integrated amplifier. Other types of tubes have been used. As a result, the sound character is slightly different and the maximum power is less. This amplifier excels in transparency.

Technical details:

• Output power: 2 x 18W (8Ω)
• Total Harmonic Distortion: ≤0,2% bij 1KHz
• Frequency range: 10Hz~70kHz (-1dB)
• Signal / Noise Ratio: >90dB
• Stereo inputs: 3 x RCA
• Tubes: 4 x EL34, 2 x ECC83 (12AX7), 2 x 6SN7GT(G)
• Loudspeaker outputs: 2  (4Ω en 8Ω)
• Weight: 24 kg
• Size (B*W*D): 430mm * 219mm * 356mm
• Remote control
• Color: Dark grey and aluminum